Engineering Design Services and Studies
VOKE Engineering provides technical, economic and strategic advisory support for energy and industrial investment opportunities. We help clients evaluate project feasibility, assess upstream and subsurface opportunities, understand reservoir potential, and make informed decisions across the investment and asset lifecycle.
Project: Golar FLNG — Offshore Pennington, Nigeria Scope: Subsea Design
Developed preliminary field layout designs and concepts covering riser configurations, flowline routing, manifold placement, umbilical termination architecture, and installation feasibility assessments for OML 86 and 88, alongside technical specifications and performance criteria for subsea equipment and systems.
Produced a slot subsea manifold concept with defined performance standards and initial layouts. Selected dry Christmas trees for clustered Funiwa and Middleton jacket wells, and wet subsea trees for satellite standalone wells. Prepared manifold and tree datasheets, and designed an electro-hydraulic-chemical umbilical with distribution equipment. Delivered initial cost estimates to guide budgeting and financial planning.
Project: UTM FLNG Pre-FEED — OML 104 Scope: Design Support Services and Manpower Supply
Provided process engineering design support: process simulation, PFDs, P&IDs, heat and material balances, equipment and line sizing, relief and blowdown studies, and hydraulic analysis for FLNG topsides and subsea tie-backs.
Delivered piping and pipeline design (route selection, wall thickness sizing, material selection, stress and flexibility analysis, support design) and instrumentation design (instrument selection, control valve sizing, shutdown logic, loop drawings, data sheets) for topsides and subsea control systems.
Defined subsea architecture (umbilicals, manifolds, trees, jumpers, flowlines) and performed flow assurance work: steady-state and transient analysis, hydrate/wax/corrosion risk assessment, chemical inhibition, and operating envelope definition. Prepared a subsea cost estimate to support investment.
PROJECT: Industrial Wastewater Resource Recovery Project.
(Dangote Oil Refining Company)
SCOPE: Design Engineering – Implement an integrated wastewater
management system Focus on resource recovery and compliance.
• Process Engineering & Design
• Civil & Structural Design
• Mechanical & Electrical Design
• Instrumentation & Automation
• Regulatory Compliance
• Project Management Deliverables
DATE: November 2019 – May 2020
PROJECT: Bonny Terminal Integrated Project (BTIP) For SPDC.
(HYUNDAI HEAVY INDUSTRIES (HHI))
SCOPE: Integration Design and Engineering Wastewater (Turnkey Basis)
• Integration with existing terminal facilities includes infrastructure to manage oily water and storage from New Process Area
• Process Engineering & Design
• Civil & Structural Design
• Mechanical & Electrical Design
• Instrumentation & Automation
• Regulatory Compliance
• Project Management Deliverables
DATE: August 2008 – January 2009
PROJECT: NGPIS 1350MW Kano IPP FEED.
(NNPC GAS & POWER INVESTMENT SERVICES)
SCOPE:
Market Study / Power Evacuation & Grid Integration Study.
• Feasibility of connecting and evacuating power from the NGPIS
1350MW IPP Kano project site to the 330/132KV Grid network.
• Market (demand &Supply) viability of the project.
• Identification of viable electricity off-takers of the NGPIS 1350MW
Kano IPP project.
DATE: NOVEMBER 2023
PROJECT: RCC 20MW Gas fired IPP Plant, Unilag, Lagos.
(Reynolds Construction Company (RCC))
SCOPE: Feasibility Study for a proposed 20MW Gas fired IPP
•Technical Feasibility
•Environmental Feasibility
•Financial and Economic Feasibility
•Market Viability and Excess Power Potential
DATE: JANUARY 202
PROJECT: NGPIS 50MW GasPowered Plant in Maiduguri
(NNPC GAS & POWER INVESTMENT SERVICES)
SCOPE: Front-End Engineering
Design (FEED)
• Determination of plant configuration
• Power generators specifications (gas and steam turbines)
• Cooling system for turbines and auxiliaries specifications
• Gas Supply infrastructure Design
• Fuel system PFD
• Power plant layout (arrangement
of main equipment)
• Process flow diagram (PFD) of
the power plant
• Heat balance Diagram (HBD) for
two loads and three ambient
temperatures
• Efficiency / Heat Rate
Calculation (in acc. to. HBD)
• Load table incl. the main
operation data
• Water & Steam system PFD
• Single line diagram
• Main building section layout
• future plant expansion
possibilities
DATE: NOVEMBER 2023
PROJECT: Nigeria Electricity Transmission Project (NETAP) Lot 2 TC 2Rehabilitation & Reinforcement of 330/132/33kV Transmission Substations (World Bank Funded)
SCOPE: 330/132kV Substation Construction Supervision Works
• QA/QC on construction of 12 Transmission Substations
• Substation Building
• Construction supervision 330/132/33kV Circuit Breakers
• Construction supervision of 330/132kV Switchgears and associated
protection and control equipment
• Construction Supervision of 330/132kV Transformers
DATE: MARCH 2023 – JANUARY 2025
PROJECT: QA/QC Third-party pre-shipment inspection services for
8,618 Nos. PV Modules in CHINA for the Total Energies , OML58
Solarization Project.
(NNPC NETCO / TOTAL)
SCOPE:
• Quality check each PV panels is 615w as per specifications
• Review of existing OEM’s Flash test reports and certifications
• Conduct Sample Testing of the PV Modules at the freight forwarding
site in China
• Confirm the cables for the PV module connections for both +ve and–ve terminals
DATE: MAY 2024
PROJECT: Premium Steel and Mines Limited Rehabilitation.
(PREMIUM STEEL AND MINES LIMITED)
SCOPE: Gas Feasibility Study
• Evaluation of the best techno-economic gas supply option to secure
gas for the plant
• Integrity checks to ensure the existing Aladja Gas Pipeline System
(AGPS) infrastructure can meet the gas supply requirements and
transport gas volume of up to 50mmscfd at a pressure of 10 bar
• Provide technical advisory services during GSA negotiations with
PSML and the gas supplier
DATE: JUNE 2017
PROJECT: Abuja Electricity Distribution Company (AEDC) Feeder
Franchise.
(QUEST OIL & ENGINEERING SERVICES LIMITED)
SCOPE: BASELINE STUDY FOR the AT6_ABUJA STEEL Feeder
for which the outcome is to give a clear business case as basis for
the Franchise investment decision.
Identification of Aggregate Technical, Commercial, and Collection
(ATC&C) losses on proposed Franchise Feeder AT6-Abuja-Steel
Provide cost to feeder cleanup cost and propose strategy for
franchise deal
DATE: 2023
PROJECT: Supply Chain Management (SCM) Governance
Framework for NNPC SCM Processes, Policies, and Procedures.
(NNPC LIMITED SCM DIVISION)
SCOPE: Development of standard NNPC SCM Corporate
guidelines and procedures.
•Category management model
• Supplier Relationship Management Framework
• Vendor/supplier performance dashboard
• SCM end-to-end value chain Implementation guidelines
DATE: 2023-2024
Have A Project In Mind?
Let’s turn your engineering challenges into reliable, high-performance solutions. From engineering design and EPC delivery to operations and maintenance support, Voke Engineering is ready to partner with you from concept through execution.